Ordering Information Model STR83D SmartLine Pressure Transmitter with Remote Diaphragm Seals Number of Seals 1 1 Remote Seal (High Side) Primary Fill Fluid (Meter body) 1 Silicone Oil 200 Dual Head DP C 316 SS (bolt-on heads) Bolts and Nuts for Transmitter Heads C Carbon Steel Bolts and Nuts Secondary Fill Fluid (capillary & seal)** 1 Silicone Oil 200 Connection of Remote Seal to Meter Body** B Capillary Length: 10 feet (3.0 m), SS Armor Seal Option** 0 None Flush Flanged Seal with Lower** AFC Diaphragm Diameter: 3.5"Flange Size: 3"Flange Pressure Rating(1): ANSI 300 Wetted Material AA Diaphragm: 316L SSUpper Insert: 316L SS Non-Wetted Material (upper, upper insert) 2 316L SS Seal-Capillary Connection 1 Center Seal Calibration Rings B 316L SS Flushing Connection and Plugs(2) S Two 1/2" with metal plugs Approvals C ATEX Explosion proof, Intrinsically Safe & Non-incendive Electronic Housing Material & Connection Type B Material: Polyester Powder Coated AluminumConnection: M20Lightning Protection: None Output/ Protocol F Analog Output: noneDigital Protocol: Foundation Fieldbus Customer Interface Selections B Indicator: BasicButtons: NoneLanguages: English Application Software 1 Standard Diagnostics Output Limit, Failsafe & Write Protect Settings 5 Write Protect: EnabledFail Mode: N/AHigh & Low Output Limits(3): N/A Fieldbus or Profibus General Configuration S Factory Standard Accuracy and Calibration A Accuracy: StandardCalibrated Range: Factory StdCalibration Qty: Single Calibration Mounting Bracket 1 Bracket Type: Angle BracketMaterial: Carbon Steel Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required Certifications & Warranty FGF1F5 NACE MR0175; MR0103; ISO15156 (FC33338) Process wetted parts onlyCalibration Test Report & Certificate of Conformance (F3399)Certificate of Origin (F0195) ** Refer to 34-ST-00-128 for additional options, consult factoryStandard facing 125-250 AARH RF (raised face) serrated surface finish.Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation.NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc.
