Ordering Information Model STR82D SmartLine Pressure Transmitter with Remote Diaphragm Seals Number of Seals 1 1 Remote Seal (High Side) Primary Fill Fluid (Meter body) 1 Silicone Oil 200 Dual Head DP D 316 SS for Close-Couple Bolts and Nuts for Transmitter Heads S 316 SS Bolts and Nuts Secondary Fill Fluid (capillary & seal)** 1 Silicone Oil 200 Connection of Remote Seal to Meter Body** 2 2 inch long SS nipple close-coupled Seal Option** 0 None Flush Flanged Seal with Lower** AFC Diaphragm Diameter: 3.5"Flange Size: 3"Flange Pressure Rating(1): ANSI 300 Wetted Material AA Diaphragm: 316L SSUpper Insert: 316L SS Non-Wetted Material (upper, upper insert) 2 316L SS Seal-Capillary Connection 1 Center Seal Calibration Rings B 316L SS Flushing Connection and Plugs(2) S Two 1/2" with metal plugs Approvals C ATEX Explosion proof, Intrinsically Safe & Non-incendive Electronic Housing Material & Connection Type C Material: Polyester Powder Coated AluminumConnection: 1/2 NPTLightning Protection: Yes Output/ Protocol H Analog Output: 4-20mA dcDigital Protocol: HART Protocol Customer Interface Selections E Indicator: AdvancedButtons: YesLanguages: EN,GR,IT, FR,SP,RU, TU Application Software 1 Standard Diagnostics Output Limit, Failsafe & Write Protect Settings 1 Write Protect: DisabledFail Mode: High> 21.0mAdc High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc) General Configuration C Custom Configuration (Unit Data Required from customer) Accuracy and Calibration B Accuracy: StandardCalibrated Range: Custom (Unit Data Required) Calibration Qty: Single Calibration Mounting Bracket 3 Bracket Type: Angle BracketMaterial: Angle Bracket Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required Certifications & Warranty F1TPFX Calibration Test Report & Certificate of Conformance (F3399)Over-Pressure Leak Test Certificate (1.5X MAWP) (F3392)EN10204 Type 3.1 Material Traceability (FC33341) Factory 0000 Factory Identification ** Refer to 34-ST-00-128 for additional options, consult factoryStandard facing 125-250 AARH RF (raised face) serrated surface finish.Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation.NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc.
