Ordering Information Model STF72F Flange Mounted Liquid Level Transmitter Process Wetted Heads & Diaphragm Materials 4 Design: Pseudo FlangeRef. Head: 316 SS(1)Vent DrainValve on Ref. Head(2): 316 SSBarrier Diaphrm. (wetted): 316 SSDiaphrm. Plate (wetted): N/AExtension (wetted): N/A Fill Fluid (Meter Body & Flange) 1 Silicone Oil 200 Process Connection H Reference Head: 1/2 NPT Adapter - material matches head material and head bolt material(3)Flange: High Pressure Side Bolts for Process Heads S 316 SS Bolts Vent/Drain Type/Location 1 Ref. Head Type: Single EndedVent Type: NoneLocation: NoneVent Material: None Gasket Material A Teflon® or PTFE (Glass Filled) Flange(ANSI Flanges have125-500 AARH Surface Finish) S 2" ANSI Class 150 without Vent/DrainFlange Material: 316L SS (wetted)Threaded Nut Ring Material: Not applicable Gasket Ring (wetted) 0 No selection Extension (wetted) 0 No selection Approvals 0 No Approval Required Electronic Housing Material & Connection Type A Material: Polyester Powder Coated AluminumConnection: 1/2 NPTLighting Protection: None Output/Protocol H Analog Output: 4-20mA dcDigital Protocol: HART Protocol Customer Interface Selections C Indicator: BasicExt Zero, Span & Config Buttons: YesLanguages: English Application Software 1 Standard Diagnostics Output Limit, Failsafe & Write Protect Settings 1 Write Protect: DisabledFail Mode: High > 21.0mAdcHigh & Low Output Limits(4): Honeywell Std (3.8 - 20.8 mAdc) General Configuration S Factory Standard Accuracy and Calibration A Accuracy: StandardCalibrated Range: Factory StdCalibration Qty: Single Calibration Mounting Bracket 0 None (not required with flange mount unit) Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) Unassembled Conduit Plugs & Adapters A6 1/2 NPT 316 SS Certified Conduit Plug Certifications & Warranty TPFXF1 Over-Pressure Leak Test Certificate (1.5X MAWP) (F3392)EN10204 Type 3.1 Material Traceability (FC33341)Calibration Test Report & Certificate of Conformance (F3399) Factory 0000 Factory Identification Supplied as 316 SS or as Grade CF8M, the casting equivalent of 316 SS.Vent/Drains are Teflon or PTFE coated for lubricity.Except Carbon Steel Heads shall use 316SS Vent/Drain, Plugs & Adapters when requiredNAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc
