FeaturesAccuracies up to 0.05% of spanStability up to 0.020% of URL per year for 10 yearsAutomatic static pressure & temperature compensationRangeability up to 100:1Response times as fast as 100msEasy to use and intuitive display capabilitiesIntuitive External Zero, Span and configuration capabilityComprehensive on-board diagnostic capabilitiesIntegral Dual Seal design for highest safety based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.0World class overpressure protectionFull compliance to SIL 2/3 requirements.Modular design characteristics Ordering Information Model STD725 Differential Pressure Transmitter Process Wetted Heads & Diaphragm Materials E Process Head Material:316 Stainless SteelDiaphragm Material: 316L Stainless Steel Fill Fluid 1 Silicone Oil 200 Process Connection A None None (1/4" NPTF female thread Std) Bolt/Nuts Materials S 316 SS Vent/Drain Type/Location 1 Head Type: Single Ended Vent Type: NoneLocation: NoneVent Material: None Gasket Materials A Teflon® or PTFE (Glass Filled) Static Pressure S Standard Static Pressure - 4500 psig (315 bar) Head/Connect Orientation 1 Standard, High Side Left, Low Side Right(1) / Std Head Orientation Approvals C ATEX Explosion proof, Intrinsically Safe & Non-incendive Electronic Housing Material & Connection Type D Material: Polyester Powder Coated AluminumConnection: M20Lighting Protection: Yes Output/Protocol H Analog Output: 4-20mA dcDigital Protocol: HART Protocol Customer Interface Selections T Indicator: Standard (w/Internal Zero,Span & Config Buttons)Ext Zero, Span & Config Buttons: YesLanguages: EN, RU Application Software 1 Diagnostics: Standard Diagnostics Output Limit, Failsafe & Write Protect Settings 3 Write Protect: EnabledFail Mode: High> 21.0mAdcHigh & Low Output Limits(2): Honeywell Std (3.8 - 20.8 mAdc) General Configuration C Custom Configuration (Unit Data Required from customer) Accuracy and Calibration B Accuracy: StandardCalibrated Range: Custom (Unit Data Required) Calibration Qty: Single Calibration Mounting Bracket 3 Bracket Type: Angle Bracket Material: 316 SS Customer Tag 0 No customer tag Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required Certifications & Warranty FGFXF1TP NACE MR0175; MR0103; ISO15156 Process wetted parts onlyEN10204 Type 3.1 Material TraceabilityCalibration Test Report & Certificate of ConformanceOver-Pressure Leak Test Certificate (1.5X MAWP) Factory 0000 Factory Identification Left side/Right side as viewed from the customer connection perspectiveNAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc
