EJA530E-JDS8N-019DL/FF1 Yokogawa EJA530E In-Line Mount Gauge Pressure Transmitter

OverviewThe EJA-E series of transmitters is Yokogawa's most recent evolution of the DPharp family. Released in 2012, it combines the ruggedness and success of the work-horse EJA-E series with the performance of the thoroughbred EJX-A series to deliver the type of product you have come to expect from Yokogawa.EJA530E's standard features include:±0.055% Accuracy (0.04% Accuracy optional)±0.1% Stability per 10 years90 ms Response TimeExida and TUV SIL2/SIL3 CertifiedLocal Parameter Setting (LPS)SpecificationsMeasurement TypesPrimary Variable: Gauge PressureReference AccuracyPrimary Variable: ±0.055% of Span±0.04% of Span (/HAC option)Stability (All Normal Operating Conditions)Primary Variable: ±0.1% of URL per 10 yearsResponse TimePrimary Variable: 90 msecRangeability:Primary Variable:A, B and C Capsules: 20:1D Capsules: 10:1Model and Suffix Codes Model EJA530E Gauge pressure transmitter Output signal -J 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)(1) Measurement span (capsule) D 4 to 20 mA DC Output with digital communication (BRAIN protocol) Wetted parts material(2) S Process connector: 316L SST#Diaphragm: Hastelloy C-276(3)#Others: 316L SST)# Process connection 8 G1/2 DIN 16 288 male(4) N Always N -0 Always 0 Amplifier housing 1 Cast aluminum alloy Electrical connection 9 M20 female, two electrical connections with a blind plug(5) Integral indicator D Digital indicator(6) Mounting bracket L 316 SST 2-inch pipe mounting Factory Mutual (FM) /FF1 FM Explosionproof Approval(7) Applicable Standard: FM3600, FM3615, FM3810, ANSI/NEMA 250 Explosionproof for Class I, Division 1, Groups B, C and D, Dust-ignitionproof for Class II/III, Division 1, “FACTORY SEALED, CONDUIT SEAL NOT REQUIRED.” Temperature class: T6, Amb. Temp.: –40 to 60°C (–40 to 140°F) The “•” marks indicates the most typical selection for each specification.The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR0175/ISO 15156. Please refer to the latest standards for details. Selected materials also conform to NACE MR0103.HART 5 or HART 7 is selectable. Specify upon ordering.Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids.Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.Hastelloy C-276 or ASTM N10276.Not applicable for combination of capsule code D and wetted parts material code H. Threads are based on the withdrawn DIN 16 288.Material of a blind plug is aluminum alloy or 304 SST.Not applicable for output signal code G.Applicable for Electrical connection code 2, 4, 7, 9, C and D.