EJA530E-JDS4N-014DN/KS22/D3/X2/T08/M15 | Yokogawa EJA530E In-Line Mount Gauge Pressure Transmitter

Ordering Information Model EJA530E Gauge pressure transmitter Output signal -J 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)(1) Measurement span (capsule) D 4 to 20 mA DC Output with digital communication (BRAIN protocol) Wetted parts material(2) S Process connector: 316L SST#Diaphragm: Hastelloy C-276(3)#Others: 316L SST# Process connections 4 1/2 NPT female - N Always N - -0 Always 0 Amplifier housing 1 Cast aluminum alloy Electrical connection 4 M20 female, two electrical connections without blind plugs Integral indicator D Digital indicator(4) Mounting bracket N None ATEX /KS22 Calibration units(5) /D3 bar calibration (bar unit) PaintingCoating change /X2 Anti-corrosion coating(6) Pressure test/ Leak test certificate(7)(8) /T08 Test Pressure: 50 MPa (7200 psi) (9)Nitrogen Gas or Water (10)Retention time: one minute The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR0175/ISO 15156. Please refer to the latest standards for details. Selected materials also conform to NACE MR0103.HART 5 or HART 7 is selectable. Specify upon ordering.Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids.Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.Hastelloy C-276 or ASTM N10276.Not applicable for output signal code G.Material traceability certification, per EN 10204 3.1 B.Not applicable with color change optionThe unit on the certificate is always kPa/MPa regardless of selection of option code D1, D3 and D4.Not applicable with process connections code for diaphragm seal system P.Applicable for capsule code D without /HGDry nitrogen gas or pure water is used for oil-prohibited use (option codes K1, K2, K5, K6, K41, K42, K45, and K46)