EJA110E features include:0.055% Accuracy (0.04% Accuracy optional)0.1% Stability per 10 years90 ms Response TimeExida and TUV SIL 2 / SIL3 CertifiedMWP 2,300 psi (MWP 3,600 psi option)Local Parameter Setting (LPS)Model and Suffix Codes Model EJA110E Differential pressure transmitter Output signal -J 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)(1) Measurement span (capsule) M 1 to 100 kPa (4 to 400 inH2O) Wetted parts material(2) S# Cover flange and process connector: ASTM CF-8M(3) Process connections 4 with 1/2 NPT female process connector Bolts and nuts material G 316L SST Installation -2 Amplifier housing 1 Cast aluminum alloy Electrical connection *2 1/2 NPT female, two electrical connections without blind plugs Integral indicator D Digital indicator(4) Mounting bracket D 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping) The “*” marks indicate the most typical selection for each specification. HART 5 or HART 7 is selectable. Specify upon ordering Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids.Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material. Cast version of 316 SST. Equivalent to SCS14A. Not applicable for output signal code G.
