EJA110E-JMS3G-B12EM/FU1/D1

EJA110E features include:0.055% Accuracy (0.04% Accuracy optional)0.1% Stability per 10 years90 ms Response TimeExida and TUV SIL 2 / SIL3 CertifiedMWP 2,300 psi (MWP 3,600 psi option)Local Parameter Setting (LPS)Ordering Information Model EJA110E Differential pressure transmitter Output signal -J 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)(1) Measurement span (capsule) M 1 to 100 kPa (4 to 400 inH2O) Wetted parts material(2) S# Cover flange and process connector: ASTM CF-8M(3)Capsule: Hastelloy C-276(4) (Diaphragm); F316L SST, 316L SST (Others)Capsule gasket: Teflon-coated 316L SSTVent/Drain plug: 316 SST Process connections 3 with 1/4 NPT female process connector Bolts and nuts material G 316L SST Installation -B Bottom Process Connection, left side high pressure(5) Amplifier housing 1 Cast aluminum alloy Electrical connection 2 1/2 NPT female, two electrical connections without blind plugs Integral indicator E Digital indicator with the range setting switch (push button)(6) Mounting bracket M 316 SST or SCS14A 2-inch pipe mounting (for bottom process connection type) Factory Mutual (FM) /FU1 Combined FF1 and FS1(7)(8) Calibration units(9) /D1 P calibration (psi unit) The “*” marks indicate the most typical selection for each specification. HART 5 or HART 7 is selectable. Specify upon ordering.Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids.Cast version of 316 SST. Equivalent to SCS14A.Hastelloy C-276 or ASTM N10276.Only applicable for Wetted parts material code S.Not applicable for output signal code F.Applicable for Electrical connection code 2, 4, 7, 9, C and D.Not applicable for output signal code Q.The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.