EJA110E-JLH4G-712DD/D4 | Yokogawa EJA110E Differential Pressure Transmitter

Part Number: EJA110E-JLH4G-712DD/D4Model and Suffix CodesModel: EJA110E - Differential pressure transmitterOutput signal: -J - 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)?Measurement span (capsule): L - Wetted parts material?: HCover flange and process connector: ASTM CF-8M?Capsule: Hastelloy C-2764Capsule gasket: PTFE TeflonVent/Drain plug: 316 SSTProcess connections: 4 - with 1/2 NPT female process connectorBolts and nuts material: G - 316L SSTInstallation: -7 - Vertical piping, left side high pressure, and process connection downsideAmplifier housing: 1 - Cast aluminum alloyElectrical connection: 2 - 1/2 NPT female, two electrical connections without blind plugs plug5Integral indicator: D - Digital indicator5Mounting bracket: D - 304 SST 2-inch pipe mounting, flat type (for horizontal piping)Optional Codes: /D4 - Calibration Unit6 - M calibration (kgf/cm? unit)NOTE:The " * " marks indicate the most typical selection for each specification.HART 5 or HART 7 is selectable. Specify upon ordering.Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user s process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.Cast version of 316 SST. Equivalent to SCS14A.Hastelloy C-276 or ASTM N10276.Not applicable for output signal code G.The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.