EJA110E-JHS4G-322DD/KS21 | Yokogawa EJA110E Differential Pressure Transmitter

Part Number: EJA110E-JHS4G-322DD/KS21Model and Suffix CodesModel: EJA110E - Differential pressure transmitterOutput signal: -J - 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)?Measurement span (capsule): H - 5 to 500 kPa (20 to 2000 inH2O)Wetted parts material?: SCover flange and process connector: ASTM CF-8M?Capsule: Hastelloy C-2764 (Diaphragm); F316L SST, 316L SST (Others)Capsule gasket: Teflon-coated 316L SSTVent/Drain plug: 316 SSTProcess connections: 4 - with 1/2 NPT female process connectorBolts and nuts material: G - 316L SSTInstallation: -3 Amplifier housing: 2 - ASTM CF-8M stainless steel6Electrical connection: 2 - 1/2 NPT female, two electrical connections without blind plugs plug5Integral indicator: D - Digital indicator5Mounting bracket: D - 304 SST 2-inch pipe mounting, flat type (for horizontal piping)Optional Codes: /KS21 - ATEXATEX Intrinsically safe Approval7,8 Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-11:2012, EN 60079-26:2007 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85?C T100?C T120?C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: ? to 60?C (? to 140?F) Maximum Process Temp. (Tp) for EPL Ga:120?C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0 ?H Amb. Temp. for EPL Db: ? to 60?C9 Max. surface Temp. for EPL Db: T85?C (Tp: 80?C), T100?C (Tp: 100?C), T120?C (Tp: 120?C) NOTE:The " * " marks indicate the most typical selection for each specification.HART 5 or HART 7 is selectable. Specify upon ordering.Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user s process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.Cast version of 316 SST. Equivalent to SCS14A.Hastelloy C-276 or ASTM N10276.Not applicable for output signal code G.Not applicable for electrical connection code 0, 5, 7 and 9.Applicable for Electrical connection code 2, 4, 7, 9, C and D.Not applicable for output signal code Q.Lower limit of ambient temperature is ??C (5?F) when option code HE is specified.